Cutlist optimizer for 2D panel cutting
Stock sheets (mm)
| Material | Length | Width | Qty | Trim | |
|---|---|---|---|---|---|
needs 0 |
Leave qty blank (NA) for unlimited stock — the optimizer then tells you how many sheets you need. Trim is removed from every edge before packing, so a 10 trim on a 2440×1220 sheet leaves 2420×1200 usable.
Parts required (mm) — 0 pieces
| Part | Length | Width | Qty | Grain fixed | |
|---|---|---|---|---|---|
| No parts yet — add the pieces you need to cut. | |||||
Grain fixed keeps a part in its given orientation; other parts may rotate 90° when rotation is allowed.
Cutting settings
×
Cut plan summary
Sheets used
0
Distinct layouts
0
Parts placed
0/0
Material yield
0.0%
Waste
0.0%
Cut length (mm)
0
Sheet area (m²)
0.00
Reusable offcuts
min 300×300 mmNo leftover piece is at least 300×300 mm. Lower the minimum reusable offcut size in cutting settings to list smaller pieces.
Layouts
Add stock sheets and parts to see cutting layouts.